Concrete dust on everything
Bare slabs shed fine dust forever — it coats your car, your tools, and everything you store.
LiquidLux Epoxy — Milton & the GTA
Concrete goes in dusty.
It comes back liquid.
Metallic and flake epoxy floors for garages, basements, and shops — diamond-ground prep, written fixed pricing, back in service in 24 hours.
Ground to bare concrete, flood-coated, and sealed under a high-gloss topcoat — in a single day.
Scroll
- Licensed & insured
- Diamond-ground prep on every job
- Written fixed quotes
- Serving Milton & the GTA
The problem
Bare concrete is the last unfinished surface in your home.
Cracks, pits & salt damage
Ontario winters drag road salt in on your tires. Unsealed concrete spalls, pits, and stains a little more every year.
Paint & DIY kits that peel
Roll-on garage kits skip the grinding. Twelve months later they lift under hot tires — and now the floor is harder to fix.
What we coat
One crew. Four surfaces. Zero shortcuts.
Garage Floor Coatings
Flake, metallic, and solid-colour systems that turn a dusty slab into the best-looking room in the house.
Explore garage systems →Basement Floor Coatings
Seamless, moisture-tolerant floors that make finished basements brighter — with no carpet to flood.
Basement floors →Countertops & Kitchens
Poured metallic countertops and seamless kitchen floors — a stone look without a stone budget or a demo crew.
Countertops & kitchens →Commercial & Industrial
Commercial systems →High-traffic systems for shops, warehouses, showrooms, and restaurants — installed around your schedule.
The transformation
Drag the line. Same garage, same day.
A real LiquidLux install — photographed the morning of the pour and again once the topcoat had cured.
Who turns up
The same crew that quoted it is the crew that pours it.
No subcontractors, no rotating faces. We grind, patch, pour, and broadcast every floor ourselves — which is why we can put a written fixed price on it and stand behind the finish.
- Prep method
- Diamond ground, never acid etched
- Job site
- Masked, cleaned, and cleared daily
Our work
Every floor is mixed, poured, and finished by the same crew.
How it works
Three visits between quote and showpiece.
- 01
Walkthrough & written quote
We measure, moisture-test the slab, and hand you a fixed written price. No estimate ranges, no surprises.
- 02
Grind & repair
Diamond grinding opens the concrete's pores; cracks and pits are filled and profiled. Prep is 70% of a floor that lasts.
- 03
Coat, broadcast & seal
Base coat, full flake or metallic broadcast, then a high-gloss polyaspartic wear layer. Park on it in 24–48 hours.
Straight answer
What actually decides the price.
We don't publish a price per square foot, because a number that ignores your concrete isn't a quote — it's bait. Here's what we look at during the walkthrough, so nothing on the invoice is a surprise.
Square footage
The single biggest driver. A single-car garage and a three-car garage are different jobs, not different sizes of the same job.
Condition of the slab
Cracks, pitting, oil saturation, and old peeling coatings all add prep. Sound concrete costs less to coat than damaged concrete.
The system you choose
A solid-colour floor, a full flake broadcast, and a hand-marbled metallic are three different materials and three different labour days.
Access and timing
Ground-floor garages are straightforward. Below-grade slabs, tight access, and after-hours commercial work carry more.
Every quote is written, fixed, and free — and it holds unless you change the scope.
Back on your floor
Most garages: coated in a day, parked on within 48 hours.
Fast-cure polyaspartic topcoats mean your garage isn't a construction zone for a week — it's out of service for a weekend, then done for a decade.
What clients say
“The floor is the first thing everyone comments on when the garage door opens.”
“One day of work and the basement finally feels finished — and bright.”
“They worked around our shop hours and we never closed for a single day.”
Service area
Based in Milton — coating floors across Halton & the GTA.
- Milton
- Oakville
- Burlington
- Mississauga
- Georgetown
- Halton Hills
- Hamilton
- Brampton
FAQ
Questions, answered
How much does an epoxy garage floor cost in Milton?
Pricing depends on square footage, concrete condition, and the finish system. Every quote starts with a free on-site visit and ends with a written, fixed price — no surprises on install day.
How long do your floors last?
A properly ground and coated floor lasts 15–20 years in residential use. Preparation is the difference — which is why we diamond-grind every slab instead of acid etching.
What's the difference between epoxy and polyaspartic?
Epoxy builds thickness and strength; polyaspartic topcoats add UV stability and fast cure times. Most of our systems combine both — an epoxy base with a polyaspartic wear layer.
How soon can I use my floor?
Light foot traffic the next morning, furniture and vehicles within 24–48 hours depending on the system and temperature.
Are your floors slippery?
Full-flake floors have natural texture, and we can add anti-slip aggregate to any finish — useful for exterior steps, ramps, and commercial kitchens.
Free quote
Three questions. Then a real number.
Tell us about the space and we'll come measure it. You get a written fixed price — not an estimate range that moves on install day.
- No obligation and no pressure
- We bring flake and metallic samples to the visit
- Most quotes booked within one business day
1 of 3